This coefficient is set to correct the vertical error of the scanner, and it is generally not necessary.Īfter the conversion is completed, it cannot be directly used for the optical drawing board. Protel PCB vertical correction coefficient. 0(D)-Normal 1-X-direction mirroring 2-Y-direction mirroring 4-positive and negative reverse The resolution of the BMP file in the Y direction (the default value is 1000) (must be the same as the resolution used when scanning) The resolution in the X direction of the BMP file (the default value is 1000) (must be the same as the resolution used when scanning) The name of the BMP file to be converted, which must be 1bit (black and white) The meaning of each parameter is as follows: 0(D)-Normal 1-XMirror 2-YMirror 4-NegativeĪmong them, the parameters in angle brackets are required options, and the parameters in square brackets are optional. If you find that a component you require is not available within the library, you may choose to find it else where, make your own, or take an existing component and modify it. USAGE:BMP2PCB.EXE īitmap(Black&White) file name to be converted This library for protel autotrax contains a standard range of parts - our best attempt within the budget of 200 parts allowed by the Autotrax package. SLEC(R) BMP-to-TraxPCB Utility-Version 2.1 In the DOS command line, type bmp2pcb without parameters to display help information The bash script does not have the drill guide import feature or the file checking feature. Data conversion: run bmp2pcb.exe program under DOS. Convert Protel Autotrax gerber for use with FlatCAM.
#PROTEL AUTOTRAX SOFTWARE#
After the scanning is completed, exit the scanning software and make appropriate adjustments in photoshp, including adjusting the plate position, contrast, and sharpness, and finally turn it into a black and white one-bit bmp image, and save it.Ģ.
#PROTEL AUTOTRAX INSTALL#
Scanning: first install the scanner, then start the photoshp software, run the TWAIN command under Import under the File menu, start the scanner, and adjust the resolution according to the size of the circuit board, generally 600dpi for small boards, 300dpi or more for large boards small.
#PROTEL AUTOTRAX WINDOWS#
Operating system: Windows 3.2 or Windows 95, 98ġ. board size up to 2x2 meter at nanometer precision. editable solder mask, paste, assembly, keepout, documentation drawings. Software: SLEC copy board software: bmp2pcb.exeĬircuit board design software: Protel for DOS or Protel for Windows multiple layers (16 copper, compile time tunable limit) smd and through-hole components. Scanner: Optical resolution 300X600 or more, color flatbed scanner Hardware: Computer: models above 486DX66, memory above 8M, support display mode above 256 colors The system uses dot matrix data vectorization technology, which greatly improves the efficiency and accuracy of circuit board copying. Using the SLEC copy board tool, the dot matrix image data is vectorized and converted into a data format that can be recognized by the CAD software Protel, resulting in 1:1 Copy the base map of the board, and finally copy the circuit board in Protel according to the base map. The SLEC-PCB scanning copy board system uses a scanner to scan the image of the circuit board into the computer.
0 kommentar(er)
